intel ? atom? d510 controller with 16-ch ai, 4-ch ao and 32-ch isolated di/o ? output range (software programmable) unipolar (v) 0 ~ 5, 0 ~ 10 bipolar (v) 5, 10 current loop (ma) 0 ~ 20, 4 ~ 20 ? driving capability 5 ma ? accuracy relative: 1 lsb; differential non-linearity: 1 lsb (monotonic) ? excitation voltage 48 v (max.) digital input /output / counter ? di channels 16 ? di input voltage logic 0: 2 v max. logic 1: 5 v min. (30 v max.) ? do channels 16 ? do output type sink type (npn) ? do output voltage 5 ~ 40 v dc ? do sink current 300 ma max. per channel ? counter channels 1 ? counter resolution 16 bits ? counter input voltage logic 0: 2 v max. logic 1: 5 v min. (30 v max.) ? counter max. input 1 mhz frequency ? isolation protection 1,000 v dc environment ? storage humidity 5 ~ 95% rh, non-condensing (iec-60068-2-3) ? operating temperature -10 ~ 60c (14 ~140f) @ 5 ~ 85% rh ? storage temperature -20 ~ 80c (-4 ~176f) ordering information ? ECU-1710A-A32E intel atom d510 1.66 ghz controller with ai/o and di/o accessories ? adam-3925-ae db25 din-rail wiring board ? adam-3937-be db37 din-rail wiring board ? onboard intel atom d510 1.66 ghz processor ? 2 x rs-232 ports ? 2 x 10/100base-t rj-45 ports ? 2 x usb ports ? integrated pci-1710ul & pci-1720u modules ? 16-ch single-ended or 8-ch differential or a combination of analog input ? 12-bit a/d converter, with up to 100ks/s sampling rate ? 4-ch 12-bit analog output ? 16-ch isolated digital input/digital output ? 1-ch isolated counter specifcations general ? dimensions (w x d x h) 255 x 152 x 59 mm (10" x 6.0" x 2.3") ? power consumption 28 w (typical) ? power requirements 18 ~ 30 v dc (e.g 24 v @ 2 a) (min. 48 w), at ? weight 2.4 kg (typical) ? os support wes 2009 system hardware ? cpu intel atom d510 1.66 ghz/ 512 kb l2 cache ? memory 1gb ddrii 667mhz ? indicators leds for power, ide and lan (active, status) ? keyboard/mouse 1 x ps/2 ? storage 1 x internal typei/ii compactflash ? slot, 1 x built-in 2.5" sata hdd bracket i/o interface ? serial ports 2 x rs-232 ? lan 2 x 10/100base-t rj-45 ports ? usb ports 2 x usb, ehci, rev. 2.0 compliant analog input ? channels 16 single-ended/ 8 differential ? resolution 12 bits ? max. sampling rate 100 ks/s ? fifo size 4,096 samples ? overvoltage protection 30 vp-p ? input impedance >18m ohm ? sampling mode delay to start, delay to stop,none ? input range (v) unipolar n/a 0 ~ 10 0 ~ 5 0 ~ 2.5 0 ~ 1.25 bipolar 10 5 2.5 1.25 0.625 accuracy (% of fsr 1lsb) 0.1 0.1 0.2 0.2 0.4 analog output ? channels 4 ? resolution 12 bits introduction the ecu-1710a is a standalone automation controller with integrated pci-1710ul and pci-1720u to provide 16-ch analog input, 4-ch analog output, 16-ch isolated digital input and 16-ch isolated digital output. this controller also supports serial communication ports and several other networking interfaces. you can seamlessly integrate your applications into the ecu-1710a and speed up your system development with these application ready controllers. new ecu-1710a rohs compliant 2002/95/ec all product specifications are subject to change without notice last updated : 5-may-2015 power & energy automation features
|